The LB.KNITS crochet bandana is a delicate lace accessory designed around a beautiful triangular motif construction. Rather than being crocheted as one continuous piece from beginning to end, this project is assembled from individual motifs that are joined together and then finished with a decorative edging and long ties. The result is an elegant, lightweight bandana with an intricate openwork appearance.
The original LB.KNITS pattern was published in July 2025 and provides a one-size design. The sample shown in the source was made for a 56 cm head circumference. The finished bandana measures 25 cm in height and 49 cm in width, with additional ties measuring 30 cm. The design uses 42 g of the recommended yarn and a 2.25 mm crochet hook.
One of the most attractive features of this project is the geometric lace structure. Six complete motifs create the main decorative sections, while four half motifs help complete the triangular shape. These pieces are joined according to the construction diagram before the outer edging and ties are added.
This tutorial presents the original construction in a clear, organized format while preserving the technical information, stitch quantities, motif counts, measurements, and finishing instructions given in the LB.KNITS source.
Project Details at a Glance
- Pattern: LB.KNITS Crochet Bandana
- Size: ONE SIZE
- Sample head circumference: 56 cm
- Finished height: 25 cm
- Finished width: 49 cm
- Tie length: 30 cm
- Yarn quantity: 42 g
- Recommended yarn: Cofil S.R.L art. Minerva, 380 m/100 g
- Yarn construction: One strand
- Crochet hook: 2.25 mm
- Additional tools: Needle and scissors
What Makes This Crochet Bandana Special?
This project has a different construction from a simple triangular crochet scarf. The body is first divided into individual lace components. Six whole motifs are worked according to Scheme 1, and four half motifs are worked according to Scheme 2. These ten components are then brought together into one triangular fabric.
The joining stage is an important part of the design because the motifs are not simply sewn together. The source specifies joining them with a joining stitch and provides Scheme 3 to show the exact directions. The diagram uses red and green arrows to indicate the joining sequence.
After the motif assembly is complete, the outside edge is worked with turning rows. Picots are introduced in the third row according to Scheme 5. The edging then continues around the 4 ยฝ motif section before the two ties are created.
This combination of separate motifs, decorative edging, and ties gives the finished accessory its distinctive triangular silhouette and open lace appearance.
Materials and Tools
The original pattern keeps the materials list simple. The recommended yarn is Cofil S.R.L art. Minerva, specified as 380 m per 100 g, and it is worked with one strand. The crochet hook size is 2.25 mm.
- Cofil S.R.L art. Minerva yarn: 380 m/100 g, one strand
- Yarn quantity: 42 g
- Crochet hook: 2.25 mm
- Needle
- Scissors
The original source does not provide a separate gauge measurement, so no gauge number should be added to the project. It also does not specify additional colors or a multi-color sequence. The pictured bandana is presented as a single-color lace accessory.
Understanding the Construction Before You Begin
Before starting, it helps to understand the entire workflow. The construction can be divided into four main stages: motif preparation, motif joining, edging, and ties.
First, six complete motifs are crocheted from Scheme 1. Four half motifs are then made from Scheme 2. Once all ten pieces are ready, they are joined using the method shown in Scheme 3.
The next stage is the border. The bandana is worked with turning rows as shown in Scheme 4. Picots are added in the third row according to Scheme 5. During the third row, the edging transitions to the section involving the 4 ยฝ motifs.
Finally, the ties are constructed. The instructions specify 80 p.s.b. stitches for the tie sections and give the exact Row 1 and Row 2 instructions. Once the final repeat is completed, all ends are hidden and the piece is prepared for wet finishing.
Step 1: Crochet the Six Whole Motifs
Begin the project by making 6 whole motifs according to Scheme 1.
Because the final bandana depends on these motifs fitting together correctly, take your time with the first motif. The diagram is the technical reference for the complete motif, so follow its symbols rather than substituting a different stitch sequence.
Once the first whole motif is finished, use it as a visual reference while making the remaining five. The goal is to keep all six pieces consistent in size and shape.
For a lace motif project, consistency is particularly useful during assembly. If one motif is noticeably different from the others, the difference can become more visible when the pieces are joined. Checking each completed motif before moving on can therefore make the assembly stage easier.
Step 2: Make Four Half Motifs
After the six whole motifs are complete, make 4 half motifs according to Scheme 2.
The half motifs are an important structural component of the triangular bandana. They help complete the outside shape and later become part of the section referenced in the edging and tie instructions.
Keep the four half motifs together after completing them. It can be useful to lay the six whole motifs and four half motifs flat before joining so you can clearly see the intended triangular arrangement shown in the construction diagram.
Step 3: Arrange the Motifs
Before joining the pieces, arrange the completed motifs according to the triangular layout represented in Scheme 3.
This is a useful point to slow down and compare the physical arrangement with the diagram. The source specifically shows two joining directions. The first direction is indicated by the red arrows, followed by the direction indicated by the green arrows.
The order matters because the individual motifs are becoming one continuous triangular fabric. Rather than joining pieces in an arbitrary order, follow the directional sequence shown by the original diagram.
For the cleanest result, make sure the motif edges are lying flat before beginning each joining section. This allows you to see which edges are being connected and makes it easier to maintain the intended shape.
Step 4: Join the Motifs
Join the motifs using the joining stitch shown in Scheme 3. Start with the direction of the red arrows and then continue with the green-arrow direction.
The joining stage transforms the individual lace components into the main triangular bandana. Work carefully and refer back to Scheme 3 as you progress rather than relying only on memory.
Do not change the joining method or substitute a different construction technique if you want to reproduce the original design. The relationship between the motifs and their joining lines is part of the finished lace pattern.
Step 5: Begin the Bandana Edging
Once the motifs have been joined into one piece, begin the edging using turning rows as illustrated in Scheme 4.
The border follows the triangular outline of the finished fabric. Continue according to the direction shown by the diagram. The source then specifies a decorative picot treatment in the 3rd row, following Scheme 5.
The picots add a delicate finishing detail to the lace edge. Since Scheme 5 provides the visual stitch arrangement, use that diagram as the reference for the picot placement rather than adding picots elsewhere.
Step 6: Continue Around the 4 ยฝ Motifs
In the third row, the edging transitions to working around the 4 ยฝ motifs. The original instructions specifically identify this point in the construction.
At the end of the third row, cut the yarn. The next stage begins the tie construction.
Following the original sequence is important here because the tie attachment is connected directly to the finished edging and the 4 ยฝ motif section. Keep the orientation of the bandana consistent with Scheme 4 when moving into this stage.
Step 7: Start the First Tie
After the third row is finished and the yarn has been cut, nabiraemo 80 p.s.b. for the first tie, following the terminology and quantity given in the source.
For Row 1, the instructions specify:
- 80 ัั.ะฑ.ะฝ. for the first tie.
- Attach the first tie to the bandana as shown by the yellow arrow in Scheme 4.
- Work N quantity of ัั.ะฑ.ะฝ. on the bandana from the side of the 4 ยฝ motif.
- Do not cut the yarn.
- Make another 80 p.s.b. for the second tie.
- Turn the work to the wrong side.
The source uses the notation N for the quantity of ัั.ะฑ.ะฝ. on the bandana. Since no numerical value is supplied there, it should remain N rather than being replaced with an invented number.
Step 8: Work Row 2
For Row 2, work 80 ัั.ะฑ.ะฝ. for the second tie, then work ัะฑ.ะฑ.ะฝ. to the end of the first tie.
After completing Row 2 once, the original instructions say to repeat Row 2 two more times.
When working the repeated rows, keep the ties aligned and avoid pulling the stitches excessively tight. The goal is to reproduce the specified construction rather than change the tie dimensions.
After completing the two additional repeats, cut the working yarn and hide all ends.
Finished Bandana Dimensions
- One size
- Sample head circumference: 56 cm
- Height: 25 cm
- Width: 49 cm
- Ties: 30 cm
These measurements belong to the original source and should be used as the reference dimensions for the project. The pattern does not provide a separate grading system with multiple sizes.
How to Check Your Work Before Wet Finishing
Before moving to the finishing process, it is helpful to make a complete construction check. This does not change the pattern; it simply helps you confirm that each original stage has been completed.
- There are 6 whole motifs from Scheme 1.
- There are 4 half motifs from Scheme 2.
- The motifs have been joined according to Scheme 3.
- The joining sequence follows the red arrows first and the green arrows second.
- The turning-row edging follows Scheme 4.
- The third row includes the picot detail from Scheme 5.
- The edging transitions around the 4 ยฝ motif section.
- The first tie begins with 80 p.s.b.
- Row 1 includes 80 ัั.ะฑ.ะฝ. for the first tie.
- The first tie is attached according to the yellow arrow in Scheme 4.
- The bandana section uses the N quantity of ัั.ะฑ.ะฝ. stated by the source.
- The second tie begins with 80 p.s.b.
- Row 2 contains 80 ัั.ะฑ.ะฝ. for the second tie and continues to the end of the first tie.
- Row 2 is repeated two additional times.
- The working yarn is cut after the final repeat.
- All ends are hidden.
Wet Finishing Instructions
The original pattern includes a specific wet-finishing procedure. The first wash is preferably done by hand, and drying on blockers is optional.
Before wet finishing, hide the ends on the wrong side without cutting the yarn. Then prepare a basin of water at approximately 30โ35ยฐC. Add a washing product intended for wool/silk and leave the bandana in the water for 15 minutes.
After 15 minutes, remove the piece from the soapy water and carefully remove excess water. Avoid rough handling of the lace fabric.
Next, rinse the bandana in clean water at approximately 30โ35ยฐC. Again, carefully remove excess water.
The source recommends placing the bandana on a towel and rolling the towel and item into a roll. Apply a little pressure to the resulting roll so that the towel absorbs the excess moisture. The finished bandana should then be semi-wet rather than saturated.
Drying the Bandana
After removing excess moisture with the towel, carefully lay the bandana flat on a horizontal surface and allow it to dry.
The source says that the first wash may preferably be followed by drying on blockers, but this is optional. The important point is to handle the lace carefully and allow the finished piece to dry properly.
Once the bandana is completely dry, cut the ends on the wrong side while leaving approximately 3 mm of yarn end, as specified by the original instructions.
If desired, the finished piece may then be steamed with an iron or steamer.
Styling the Finished Crochet Bandana
The finished photographs show several ways the bandana can be worn. Its triangular lace construction allows it to sit naturally over the hair while the ties secure it in place. The warm rust-colored sample creates a strong contrast with summer clothing and highlights the openwork motif pattern.
The back view makes the triangular construction especially clear. The upper edge follows the head while the pointed lower portion extends toward the back. The long ties provide the final method of securing the accessory.
The side view also shows the decorative lace edge around the face and hair. Because the pattern is worked from individual motifs, the finished fabric has a distinctive geometric texture rather than the appearance of a plain solid triangle.
Tips for Working the Motif Construction
Keep the first motif as a reference
After completing the first whole motif, use it as your visual comparison for the remaining five. This can make it easier to notice differences before reaching the joining stage.
Keep the half motifs together
The four half motifs are specifically part of the final construction. Keeping them organized separately can make the layout easier to understand when you prepare the triangular arrangement.
Study the joining direction
Scheme 3 is particularly important because it indicates the joining sequence using two sets of arrows. Follow the red arrows first and then the green arrows.
Pay attention to the third edging row
The third row is where the picot detail is introduced according to Scheme 5, and it is also where the edging transitions to the 4 ยฝ motif section.
Do not invent the N stitch count
The original instructions use N for the quantity of ัั.ะฑ.ะฝ. worked on the bandana from the 4 ยฝ motif side. Because the source does not provide a numerical value for N, it should not be replaced with a guessed number.
Frequently Asked Questions
What size is the LB.KNITS crochet bandana?
The pattern is ONE SIZE. The sample was made for a 56 cm head circumference. The finished height is 25 cm and the finished width is 49 cm, with 30 cm ties.
How much yarn does the project use?
The source specifies a yarn consumption of 42 g.
What yarn does the pattern recommend?
The recommended yarn is Cofil S.R.L art. Minerva, with a specification of 380 m per 100 g, worked with one strand.
Which crochet hook is required?
The pattern specifies a 2.25 mm crochet hook.
How many whole motifs are needed?
You need 6 whole motifs made according to Scheme 1.
How many half motifs are needed?
You need 4 half motifs made according to Scheme 2.
How are the motifs joined?
The motifs are joined with a joining stitch according to Scheme 3. The source instructs you to follow the red-arrow direction first and then the green-arrow direction.
When are the picots worked?
The picots are worked in the third edging row according to Scheme 5.
How many stitches are used for the ties?
The tie construction uses 80 p.s.b. stitches for the tie sections. Row 1 specifies 80 ัั.ะฑ.ะฝ. for the first tie, and Row 2 specifies 80 ัั.ะฑ.ะฝ. for the second tie.
How many times is Row 2 repeated?
After completing Row 2 once, the original instructions say to repeat Row 2 two more times.
What water temperature is recommended for washing?
The source recommends water at approximately 30โ35ยฐC for both the washing and rinsing stages.
How long should the bandana remain in the washing water?
The instructions say to leave the piece in the washing solution for 15 minutes.
Can the finished bandana be steamed?
Yes. After the bandana has dried, the source says that it may optionally be steamed with an iron or steamer.
A Simple Workflow for Beginners
If lace crochet is new to you, the easiest way to approach this design is to work in stages instead of trying to visualize the entire bandana at once.
Start with the six whole motifs. Once those are complete, make the four half motifs. Then stop and arrange all of the pieces according to the construction diagram. This creates a natural checkpoint before the joining begins.
Next, concentrate on the joining sequence. Scheme 3 is your reference here. Once the pieces become one fabric, move to Scheme 4 for the turning-row edging. Pay particular attention to the third row and the picots shown in Scheme 5.
The final construction stage consists of the two ties. Keep the specified 80-stitch quantities in view and follow the Row 1 and Row 2 instructions without adding extra rows.
Finally, hide the ends and complete the wet-finishing procedure. The washing and drying stage is part of the original pattern instructions and gives you the opportunity to prepare the lace fabric for wearing.
The Finished Look
The finished LB.KNITS bandana combines a decorative lace motif pattern with a practical triangular silhouette. The motif construction gives the accessory its visual character, while the ties make it possible to secure the bandana comfortably around the head.
The photographs also demonstrate how the openwork design works as a fashion accessory. The bandana can be worn with the pointed section toward the back and the ties secured underneath or around the hair, creating a relaxed summer look.
Pattern Notes and Source Information
The original document identifies the design as ะะะกะะะะ LB.KNITS and credits Liliia Bardievska / LB.KNITS. The source is dated July 2025.
The original document states that the pattern is intended for individual non-commercial use and that sale, copying, publication, or distribution are prohibited. Anyone using or publishing the original pattern should respect the designer’s stated conditions.
The source also provides the Instagram reference @lb.knits and the hashtag #ะบะพัะธะฝะบะฐ_ะท_lbknits for finished works.
Final Thoughts
The LB.KNITS crochet bandana is an elegant lace project built around a carefully planned motif construction. Its finished appearance comes from the combination of six whole motifs, four half motifs, joining stitches, a turning-row border, decorative picots, and two structured ties.
Although the finished piece looks intricate, dividing the work into separate stages makes the construction easier to understand. The most important checkpoints are the ten motifs, the joining direction in Scheme 3, the third-row picots, the transition around the 4 ยฝ motif section, and the exact tie instructions.
For the most faithful result, keep the original 2.25 mm hook, recommended Cofil S.R.L art. Minerva yarn, 42 g yarn quantity, stated dimensions, motif counts, and tie stitch quantities unchanged. Use the diagrams as the technical reference at every construction stage.
Once the final ends are hidden, the bandana is washed carefully at approximately 30โ35ยฐC, dried flat, and optionally steamed, the finished lace accessory is ready to wear.
Congratulations on completing your LB.KNITS crochet bandana!